Kia Soul: Brake Switch. Inspection - Brake System - Brake SystemKia Soul: Brake Switch. Inspection

Kia Soul 2014-2019 PS Service Manual / Brake System / Brake System / Brake Switch. Inspection

1.
Check the stop lamp switch.
(1)
Connect a circuit tester to the connector of stop lamp switch, and check whether or not there is continuity when the plunger of the stop lamp switch is pushed in and when it is released.
(2)
The stop lamp switch is in good condition if there is no continuity when plunger is pushed.
    Brake Switch. Removal
    1. Disconnect the brake switch connector (A). 2. Pull the locking plate (A) as indicated by the arrow. 3. ...

    Brake Switch. Installation
    1. Fix the brake pedal arm and insert fully the brake switch as hiding contact part. 2. After inserting, turn the brake switch 45В° ...

    See also:

    Coolant Replacement And Air Bleeding
       Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure ...

    AUX
    AUX is used to play external MEDIA currently connected with the AUX terminal. AUX mode will automatically start when an external device is connected with the AUX terminal. If an external device is ...

    Auto Light Sensor Inspection
    In the state of IGN1 ON, when the multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light se ...