Kia Soul: Brake Switch. Installation - Brake System - Brake SystemKia Soul: Brake Switch. Installation

Kia Soul 2014-2019 PS Service Manual / Brake System / Brake System / Brake Switch. Installation

1.
Fix the brake pedal arm and insert fully the brake switch as hiding contact part.
2.
After inserting, turn the brake switch 45В° clockwise, and then assemble locking plate by pushing.
3.
Confirm the gap between brake switch and bracket.
Brake clearance (A):
1.0 ~ 2.0 mm (0.04 ~ 0.08 in.)

4.
Connect the brake switch connector (A).
    Brake Switch. Inspection
    1. Check the stop lamp switch. (1) Connect a circuit tester to the connector of stop lamp switch, and check whether or not there is ...

    Brake Switch. Adjustment
    Brake switch clearance adjustment If the gap between brake switch and bracket is not 1.0 ~ 2.0mm(0.04~ 0.08in), conform to below. 1. Disconnect the brake swi ...

    See also:

    Power outlet
    Front (Type A) Front (Type B) Rear The power outlet is designed to provide power for mobile telephones or other devices designed to operate with vehicle electrical systems. The devices shou ...

    Removal
    1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper cover. (Refer to Body - "Front Bumper ...

    Side impact air bag
    Your vehicle is equipped with a side impact air bag in each front seat. The purpose of the air bag is to provide the vehicle's driver and/or the front passenger with additional protection ...