Kia Soul: Starter Description
Kia Soul 2014-2019 PS Service Manual / Engine Electrical System / Starting System / Starter Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery cable.
When the ignition key is turned to the start position, current flows and
energizes the starter motor's solenoid coil.
The solenoid plunger and clutch shift lever are activated, and the clutch
pinion engages the ring gear.The contacts close and the starter motor cranks.
In order to prevent damage caused by excessive rotation of the starter
armature when the engine starts, the clutch pinion gear overruns.
| 1. Magnet switch assembly 2. Brush holder assembly 3. Armature assembly 4. Over running clutch assembly |
Troubleshooting
•
The battery must be in good condition and fully charged
for this troubleshooting.
...
Starter Specification
Item
Specification
Rated voltage
12 V, 0.9 kW
The number of pinion teeth
10
Performance
[No-load, 11.5 V]
Ampere
Max ...
See also:
Fuel Tank Pressure Sensor (FTPS). Specifications
Specification
Pressure [kPa (kgf/cm²,
in H2O)
Output Voltage (V)
-6.67 (-0.068, -26.8)
0.5
0
2.5
+6.67 (0.068, 26.8)
...
Roller Blind Installation
1.
Install the roller blind side bracket (A) fit into the guide groove
(B).
2.
Tighten the mounting screws after installing the ro ...
Front Door Module Replacement
1.
Remove the front door window glass.
(Refer to Front Door - "Front Door Window Glass")
2.
Remove the front door outside hand ...