Kia Soul: Starter Specification - Starting System - Engine Electrical SystemKia Soul: Starter Specification

Kia Soul 2014-2019 PS Service Manual / Engine Electrical System / Starting System / Starter Specification

Item
 Specification
Rated voltage
 12 V, 0.9 kW
The number of pinion teeth
 10
Performance
[No-load, 11.5 V]
 Ampere
 Max. 60 A
Speed
 Min. 5,500 rpm

    Starter Description
    The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the battery ...

    Starter Components
    1. Screw 2. Front bracket assembly 3. Stop ring 4. Stopper 5. Overrunning clutch 6. Lever 7. Lever plate 8. Lever packing 9. Magnet switch assembly 10. Armatu ...

    See also:

    Engine compartment fuse replacement
    1. Turn the ignition switch and all other switches off. 2. Remove the fuse panel cover by pressing the tab and pulling the cover up. 3. Check the removed fuse; replace it if it is blown. To remove ...

    ETC (Electronic Throttle Control) System. Repair procedures
    Inspection Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output v ...

    Front seat adjustment - manual
    Forward and backward To move the seat forward or backward: 1. Pull the seat slide adjustment lever up and hold it. 2. Slide the seat to the position you desire. 3. Release the lever and make s ...