Kia Soul: Rear Mud Guard Replacement - Body Side Moulding - Body (Interior and Exterior)Kia Soul: Rear Mud Guard Replacement

Kia Soul 2014-2019 PS Service Manual / Body (Interior and Exterior) / Body Side Moulding / Rear Mud Guard Replacement

  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
After loosening the mounting clip and screws, then remove the rear mud guard (A).

2.
Install in the reverse order of removal.
  
Replace any damaged clips.
    Front Mud Guard Replacement
       • Put on gloves to protect your hands. ...

    Side Sill Moulding Replacement
       • Put on gloves to protect your hands. ...

    See also:

    TPMS Receiver. Diagnosis procedure by using diagnostic device
    As manual for diagnosis methods by using diagnosis device, the main contents are as follows: 1. Connect self-diagnosis connector(16pins) located in the lower of driv ...

    Hazard Lamp Switch Installation
    1. Install the hazard switch in the center airvent assembly. 2. Connect the connector and install the center airvent assembly. ...

    TPMS Sensor Mode of Operation
    ASIC Mode 1. Factory Mode The factory mode is the mode that allows the TPM sensor to transmit RF Frames and sample LF more often in the HKMC factory. T ...