•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Take care not to scratch the body surface.
|
|
1. |
Loosen the side sill moulding mounting screws.
|
2. |
Using a screwdriver or remover, remove the side sill moulding
(A).
|
3. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
•
Put on gloves to protect your hands.
...
See also:
Scheduled maintenance service
Follow the Normal Maintenance Schedule if the vehicle is usually operated where none of the following conditions apply. If any of the following conditions apply, follow the Maintenance Under Severe ...
Brake Line. Removal
1.
Disconnect the brake fiuid level switch connector, and remove
the reservoir cap.
2.
Remove the brake fluid from the master cylinder rese ...
Rear Coil Spring Replacement
1.
Loosen the wheel nuts slightly. Raise the vehicle, and make sure
it is securely supported.
2.
Remove the front wheel and tire (A) from f ...