| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Take care not to scratch the body surface.
|
|
|
1. |
Remove the front tire.
|
|
2. |
After loosening the mounting clips and screws, then remove the
front wheel guard (A).
|
|
3. |
Install in the reverse order of removal.
|
• |
Replace any damaged clips.
|
|
|
•
Put on gloves to protect your hands.
...
•
Put on gloves to protect your hands.
...
See also:
SS-B Solenoid Valve(ON/OFF). Circuit Diagram
...
Closing the hood
1. Before closing the hood, check the following:
All filler caps in the engine compartment must be correctly installed.
2. Lower the hood halfway and push down to securely lock in place.
WARNING
...
Under Body
Projected Dimensions
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
Actual-Measurement Dimensions
* These d ...
Kia Soul: Front Wheel Guard Replacement
A Pillar Garnish Replacement
Rear Wheel Guard Replacement