•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Take care not to scratch the body surface.
|
|
1. |
After loosening the mounting screw, then remove the A pillar garnish
(A) by using a screw driver.
• |
Relplace the A pillar garnish to a new one.
|
|
![](./images/books/1647/spsbd4081n.gif)
|
2. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
•
Put on gloves to protect your hands.
...
•
Put on gloves to protect your hands.
...
See also:
Heater Unit Component Location
...
Front Disc Brake. Installation
Brake caliper assembly
1.
Install in the reverse order of removal.
2.
Compress the piston into the caliper body using the SST (09581-11000). ...
Pairing PHONE Key
When No Devices have been Paired
1.Press the key or the key on the steering remote controller.
2.Select [OK] button to enter the Pair Phone screen.
1)Car Name : Name of device as shown when ...