Kia Soul: Starter Description
Kia Soul 2014-2019 PS Service Manual / Engine Electrical System / Starting System / Starter Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery cable.
When the ignition key is turned to the start position, current flows and
energizes the starter motor's solenoid coil.
The solenoid plunger and clutch shift lever are activated, and the clutch
pinion engages the ring gear.The contacts close and the starter motor cranks.
In order to prevent damage caused by excessive rotation of the starter
armature when the engine starts, the clutch pinion gear overruns.
| 1. Magnet switch assembly 2. Brush holder assembly 3. Armature assembly 4. Over running clutch assembly |
Troubleshooting
•
The battery must be in good condition and fully charged
for this troubleshooting.
...
Starter Specification
Item
Specification
Rated voltage
12 V, 0.9 kW
The number of pinion teeth
10
Performance
[No-load, 11.5 V]
Ampere
Max ...
See also:
Transmitter Code Registration (Using GDS)
1.
Connect the DLC cable of GDS to the data link connector (16
pins) in driver side crash pad lower panel, turn the power on GDS.
...
Hood Latch Release Handle Replacement
1.
Using a screwdriver or remover, remove the hood release handle
(A).
...
Fuel filter (cartridge)
A clogged filter can limit the speed at which the vehicle may be driven, damage
the emission system and cause multiple issues such as hard starting. If an excessive
amount of foreign matter accumu ...