Kia Soul: Hood Latch Release Handle Replacement - Hood - Body (Interior and Exterior)Kia Soul: Hood Latch Release Handle Replacement

Kia Soul 2014-2019 PS Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Release Handle Replacement

1.
Using a screwdriver or remover, remove the hood release handle (A).
  
Use a 6mm hex bit to press the center until the handle easily pulls off the post.

2.
Install in the reverse order of removal.
  
Make sure the hood latch cable is connected properly.
Make sure the hood locks/unlocks and opens/closes properly.
    Hood Latch Release Handle Component Location
    1. Hood latch release handle ...

    Hood Latch Component Location
    1. Hood upper latch assembly 2. Hood lower latch assembly ...

    See also:

    Description
    The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire. The Alternator has eight built-in diodes, each rectifying AC curre ...

    SS-B Solenoid Valve(ON/OFF). Specifications
    ON/OFF Solenoid Valve(SS-B) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33(5.0, 71.12)  Internal resistance(Ω) ...

    Antenna (if equipped)
    Your vehicle uses a roof antenna to receive AM or/and FM broadcast signals. This antenna is removable. To remove the roof antenna, turn it counterclockwise. To install the roof antenna, turn i ...