Kia Soul: Removal
| 1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
| 2. |
Disconnect the clutch switch connector (A).
|
| 3. |
Remove the clutch switch (B).
|
Inspection
Signal Circuit Inspection
1.
Check clutch switch pull-up voltage
(1)
IG KEY "OFF", ENGINE "OFF".
...
Installation
1.
Install in the reverse order of removal.
(1)
Tighten the nut with the specified torque.
Tightening ...
See also:
Shift Lever. Installation
1.
Install in the reverse order of removal.
When installing, set room sid ...
Inspection
1.
Remove the cowl top cover.
(Refer to Body - "Cowl Top Cover")
2.
Disconnect the windshield deicer connect ...
Lighting
Battery saver function
The purpose of this feature is to prevent the battery from being discharged.
The system automatically turns off the parking lights when the driver removes
the ignition ...