Kia Soul: Installation - Clutch Switch - Clutch SystemKia Soul: Installation

Kia Soul 2014-2019 PS Service Manual / Clutch System / Clutch Switch / Installation

1.
Install in the reverse order of removal.
(1)
Tighten the nut with the specified torque.

Tightening torque:
2.0 ~ 4.0 N.m (0.2 ~ 0.4 kgf.m, 1.4 ~ 2.9 lb-ft)

  
After pressing the clutch pedal operation stroke to the position (D), turn the clutch switch lever to ON->OFF position (E) and then tighten the bolts (B) with specified torque.

Clutch pedal operation stroke (D)
Gasoline 1.6: 145 ± 3 mm(5.7087 ± 0.1181 in.)
Gasoline 2.0: 150 ± 3 mm(5.9055 ± 0.1181 in.)
Ignition lock switch ON->OFF position (E)
Gasoline 1.6: 72.5 ± 3 mm(2.8543 ± 0.1181 in.)
Gasoline 2.0: 75.0 ± 3 mm(2.9528 ± 0.1181 in.)

    Removal
    1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the clutch switch connector (A). ...

    See also:

    Power windows
    The ignition switch must be in the ON position for power windows to operate. Each door has a power window switch that controls the door's window. The driver has a power window lock button which ...

    All Random
    Press the   key Set [ A.RDM] through the TUNE knob or key to randomly play all songs within the USB. ❈ Press A.RDM again to turn off. ...

    SRS Control Module (SRSCM). Removal
    1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...