Kia Soul: Emergency Fastening Device (EFD). Removal
1. |
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
|
2. |
To remove the emergency fastening device (C), keep on pushing
the lock pin (A) as arrow direction. And then remove the seat belt after
pushing the lock pin (B).
|
3. |
Remove the center pillar lower trim.
(Refer to Body - "Center pillar trim")
|
4. |
Disconnect the emergency fastening device connector (A).
|
5. |
Loosen the mounting bolt (B) and then remove the emergency fastening
device.
|
Emergency Fastening Device (EFD). Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least thirty seconds. ...See also:
Overdrive Clutch Control Solenoid Valve(OD/C_VFS). Description
Overdrive clutch control solenoid valve(OD/C) is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic pressure
inside the overdrive clutch.
...
Normal maintenance schedule
The following maintenance services must be performed to ensure good emission control and performance. Keep receipts for all vehicle emission services to protect your warranty. Where both mileage and ...
Blower Resistor (Manual) Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
...