Kia Soul: Blower Resistor (Manual) Replacement
Kia Soul 2014-2019 PS Service Manual / Heating,Ventilation And Air Conditioning / Blower / Blower Resistor (Manual) Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
|
| 3. |
Disconnect the connector (A) and then remove the blower resistor
(B) after loosening the mounting screws.
|
| 4. |
Install in the reverse order of removal.
|
Blower Resistor (Manual) Inspection
1.
Measure the resistance between the terminals.
2.
The measured resistance is not within specification, the blower
resistor must be replac ...
Field Effect Transistor (FATC) Inspection
1.
Turn the ignition switch ON.
2.
Manually operate the control switch and measure the voltage of
the blower motor.
3. ...
See also:
CVVT & Camshaft Installation
1.
Install the intake CVVT (A) to the intake camshaft.
Tightening torque :
63.7 ~ 73.5 N.m (6.5 ~ 7.5 kgf.m, 47.0 ~ 54.2 lb-ft)
...
Air bag
(1) Driver’s front air bag
(2) Passenger’s front air bag
(3) Side air bag
(4) Curtain air bag
WARNING
Even in vehicles with air bags, you and your passengers must always wear the
safety ...
Rear Torsion Beam Axle Inspection
1.
Check the hub for cracks and the splines for wear.
2.
Check the rear axle carrier for cracks.
...