Kia Soul: Brake Switch. Adjustment
Brake switch clearance adjustment |
If the gap between brake switch and bracket is not 1.0 ~ 2.0mm(0.04~ 0.08in),
conform to below.
1. |
Disconnect the brake switch connector (A).
|
2. |
Pull the locking plate (A) as indicated by the arrow.
|
3. |
Turn brake switch 45° counterclockwise and remove it.
|
4. |
Fix the brake pedal arm and insert fully the brake switch as hiding
contact part.
|
5. |
After inserting, turn the brake switch 45° clockwise, and then
assemble locking plate by pushing.
|
6. |
Confirm the gap between brake switch and bracket.
|
7. |
Connect the brake switch connector (A).
|
Brake Switch. Installation
1. Fix the brake pedal arm and insert fully the brake switch as hiding contact part. 2. After inserting, turn the brake switch 45° ...Front Disc Brake. Components
1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Inner pad shim 6. Brake pad 7. Pad retainer ...See also:
Rear Disc Brake. Removal
Brake caliper assembly
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft ...
Answering Calls
Answering a Call
Answering a call with a Bluetooth® Wireless Technology device connected will
display the following screen.
To accept the call, press
key on the steering wheel while the call ...
Fog Lamps Removal
Front Fog Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front bumper.
(Refer to Body - &qu ...