Kia Soul: Auto Head Lamp Leveling Unit Operation
Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Auto Head Lamp Leveling Device / Auto Head Lamp Leveling Unit Operation
Operating Procedure
1. |
Suspension angle change resulted from vehicle's load change.
|
2. |
Sensor angle change.
|
3. |
Microprocessor calculates necessary head lamp angle change
amount.
|
4. |
Sending a proper signal to head lamp leveling device and driving
actuator.
|
Operating Condition
1. |
Ignition on
|
2. |
Low beam on
|
3. |
On stop : If sensor lever change is 0.7° and above, head lamp
is operated after max. 1.5 sec.
|
4. |
On driving : If vehicle velocity is over 4km/h(2.48mile/h),
velocity change is not over 0.8-1.6km/h(0.5 ~ 1.0mile/h) per second,
and loading condition is changed, then head lamp is operated.
|
Components
1. |
Auto head lamp leveling unit
1. Leveling unit & sensor
2. Sensor mounting bracket
3. Sensor linkage
|
2. |
Actuator
|
Auto Head Lamp Leveling Unit Description
According to driving environment and loading state of vehicle, head lamp lighting direction is changed to keep the driver's visibility range and to protect the driver's vision from ...Auto Head Lamp Leveling Unit Inspection
1. Ignition "ON". 2. Turn on the head lamp switch. 3. Check for operation. ...See also:
Trouble Symptom Charts
Trouble Symptom 1
Trouble Symptom 2
Trouble symptom
Probable cause
Remedy
The set vehicle speed varies greatly upward or
downward
"Su ...
Good driving practices
Never move the shift lever from P (Park) or N (Neutral) to any other position
with the accelerator pedal depressed.
Never move the shift lever into P (Park) when the vehicle is in motion.
Sl ...
Crankshaft Position Sensor (CKPS). Repair procedures
Inspection
1.
Check signal waveform of CKPS and CMPS using a GDS.
Specification:
Refer to “Waveform”
Removal
...