Kia Soul: Auto Head Lamp Leveling Unit Inspection
Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Auto Head Lamp Leveling Device / Auto Head Lamp Leveling Unit Inspection
| 1. |
Ignition "ON".
|
| 2. |
Turn on the head lamp switch.
|
| 3. |
Check for operation. If the aim of the head lamps changes
smoothly when the head lamp leveling switch is turned.
|
| 4. |
If the operation does not work well, inspect the connector
and terminals to be sure they are all making good contact.
If the terminals are bent, loose or corroded, repair them
as necessary, and recheck the system.
If the terminals look OK, go to step 5.
|
| 5. |
Substitute with a known-good head lamp assembly and check
for proper operation.
|
Auto Head Lamp Leveling Unit Operation
Operating Procedure
1.
Suspension angle change resulted from vehicle's load change.
2.
Sensor angle change.
...
Auto Head Lamp Leveling Unit Removal
1.
Remove the head lamp leveling unit connector (A).
2.
Remove the head lamp leveling unit (B) after loosening the
mountin ...
See also:
Cylinder Head Reassembly
•
Thoroughly clean all parts to be assembled.
•
...
Exhaust System Inspection
1.
Visually check the pipes, hangers and connections for severe corrosion,
leaks or damage.
2.
Check for unusal exhaust sounds or abnormal ...
Storage compartment
These compartments can be used to store small items.
To avoid possible theft, do not leave valuables in the storage compartment.
Always keep the storage compartment covers closed while driving. ...