Kia Soul: Cylinder Head Reassembly - Cylinder Head Assembly - Engine Mechanical SystemKia Soul: Cylinder Head Reassembly

Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Cylinder Head Assembly / Cylinder Head Reassembly

  
•
Thoroughly clean all parts to be assembled.
•
Before installing the parts, apply fresh engine oil to all sliding and rotating surface.
•
Replace oil seals with new ones.
1.
Install the valves.
(1)
Install the spring seats.
(2)
Using the SST (09222 - 2B100), push in a new oil seal.
  
•
Do not reuse old valve stem oil seals.
•
Incorrect installation of the seal could result in oil leakage past the valve guides.
  
Intake valve stem seals are different from exhaust ones in type.
Do not reassembly ones in the other's places.
(3)
Install the valve, valve spring and spring retainer, after applying engine oil at the end of each valve.
  
When installing valve springs, the enamel coated side should face the valve spring retainer.
2.
Using the SST(09222 - 3K000, 09222 - 3K100), compress the spring and install the retainer locks.
After installing the valves, ensure that the retainer locks are correctly in place before releasing the valve spring compressor.

  
When installing the SST, use the torque, 1.2kgf.m or less.
3.
Lightly tap the end of each valve stem two or three times with the wooden handle of a hammer to ensure proper seating of the valve and retainer lock.
4.
Install the MLA(Mechanical lash adjuster)s.
Check that the MLA (A) rotates smoothly by hand.

  
All the MLAs must be installed in its original position.
    Cylinder Head Inspection
    Cylinder Head 1. Inspect for flatness. Using a precision straight edge and filler gauge, measure the surface the contacting the cylinder block and the ...

    Cylinder Head Installation
       • Thoroughly clean all parts to be assembled. • ...

    See also:

    Maintenance services
    You should exercise the utmost care to prevent damage to your vehicle and injury to yourself whenever performing any maintenance or inspection procedures. Should you have any doubts concerning the ...

    Engine compartment
    1.6 Gasoline 2.0 Gasoline 1. Windshield Washer Fluid Reservoir 2. Engine Oil Filler Cap 3. Engine Oil Dipstick 4. Engine Coolant Reservoir 5. Radiator Cap 6. Brake/Clutch Fluid Reservoir 7 ...

    Battery replacement
    A smart key battery should last for several years, but if the smart key is not working properly, try replacing the battery with a new one. If you are unsure how to use your smart key or replace ...