Kia Soul: Alternator Description
Kia Soul 2014-2019 PS Service Manual / Engine Electrical System / Charging System / Alternator Description
The Alternator has eight built-in diodes, each rectifying AC current to
DC current.
Therefore, DC current appears at alternator "B" terminal.
In addition, the charging voltage of this alternator is regulated by the
battery voltage detection system.
The alternator is regulated by the battery voltage detection system.
The main components of the alternator are the rotor, stator, rectifier,
capacitor brushes, bearings and V-ribbed belt pulley.
The brush holder contains a built-in electronic voltage regulator.
| 1. Brush 2. Overrunning Alternator Decoupler (OAD) pully 3. Rotor 4. Stator 5. Rectifier |
On-vehicle Inpection
•
First of all, check for DTCs. If a DTC is present, perform
troubleshooting in accord ...
Alternator Specification
Alternator
ltem
Specification
Nominal output
13.5V, 110A
Speed in use
1,000 ~ 18,000 rpm
Voltage regulator
IC Regulator bu ...
See also:
Rail Pressure Sensor (RPS). Schematic Diagrams
Circuit Diagram
(M/T)
(A/T)
...
Occupant Detection System (ODS). Installation
1.
Install in the reverse order of removal.
2.
Reconnect the battery negative cable.
3.
After installing the OD ...
Shift Lever Removal
1.
Rotating counter-clockwise shift lever knob (A).
2.
Remove the floor console assembly.
(Refer to Body - "Floor Console& ...