Kia Soul: Alternator Specification
Kia Soul 2014-2019 PS Service Manual / Engine Electrical System / Charging System / Alternator Specification
Alternator
| ltem |
Specification |
|
| Nominal output |
13.5V, 110A |
|
| Speed in use |
1,000 ~ 18,000 rpm |
|
| Voltage regulator |
IC Regulator built in type |
|
| Regulator Setting Voltage |
External mode |
Refer to below graph |
| Internal mode |
14.55 ± 0.3V |
|
| Temperature Gradient |
External mode |
0 ± 3 mV / °C |
| Internal mode |
-3.5 ± 2mV / °C |
|
| Target voltage data (COM) |
Frequency (Hz) |
115 ~ 500 |
| Signal type |
PWM |
|
| Voltage level (V) |
High: 3.5 ± 0.2 |
|
| Low: 1.5 ± 0.2 |
||
| Electric load (FR) |
Frequency (Hz) |
250 ± 38 |
| Signal type |
PWM |
|
| Current limitation from vehicle (mA) |
2.7 ~ 7.0 |
|
※ Regulator Setting Voltage (External mode)
Alternator Description
The Alternator has eight built-in diodes, each rectifying AC current to
DC current.
Therefore, DC current appears at alternator "B" terminal.
In addition, the charging voltage ...
Alternator Components
1. Overrunning Alternator Decoupler (OAD) pully
2. Front bracket
3. Front bearing
4. Stator
5. Rotor
6. Rear bearing
7. Rear housing
8. Regulator assembly
9. Thr ...
See also:
Component Location
1. Fender assembly
...
SRS components and functions
The SRS consists of the following components:
1. Driver's front air bag module
2. Passenger's front air bag module
3. Side air bag modules
4. Curtain air bag modules
5. Retractor pre- ...
Steering Gear box. Components
1. Steering Gear box
...