Kia Soul: Shift Lever Removal - Manual Transaxle Control System - Manual Transaxle SystemKia Soul: Shift Lever Removal

Kia Soul 2014-2019 PS Service Manual / Manual Transaxle System / Manual Transaxle Control System / Shift Lever Removal

1.
Rotating counter-clockwise shift lever knob (A).
2.
Remove the floor console assembly.
(Refer to Body - "Floor Console")
3.
Remove the rear heating joint duct (A).
4.
Remove the bracket (A).
5.
Remove the select cable (B) after removing the snap pin (A).
6.
Remove the cable socket (C) from lever assembly after pulling in the direction of the arrow.
7.
Remove the shift cable (B) after removing the clip (A).
8.
Remove the cable socket (A) from lever assembly after pulling in the direction of the arrow.
9.
Remove the shift lever assembly (B) by removing the bolts (A).
Tightening torque:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

    Shift Lever Components
    1. Knob 2. Boots 3. Shift lever assembly 4. Select cable clip 5. Shift cable 6. Select cable 7. Cable retainer ...

    Shift Lever Installation
    1. Install in the reverse order of removal.    When installing, set room sid ...

    See also:

    Notes on the safe use of the Tire Mobility Kit
    Park your car at the side of the road so that you can work with the Tire Mobility Kit away from moving traffic. To be sure your vehicle will not move, even when you're on fairly level g ...

    Tie-down hook (for flatbed towing)
    CAUTION - Tie-down hooks Do not use the hooks under the rear of the vehicle for towing purposes. These hooks are designed ONLY for transport tiedown. If the tie-down hooks are used for towing, ...

    Blade inspection
    ✽ NOTICE Commercial hot waxes applied by automatic vehicle washes have been known to make the windshield difficult to clean. Contamination of either the windshield or the wiper blades w ...