Kia Soul: Timing Chain Installation - Timing System - Engine Mechanical SystemKia Soul: Timing Chain Installation

Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Timing System / Timing Chain Installation

1.
Dowel pin of crankshaft should be positioned at 3° in relation to vertical center line.
2.
Align the TDC marks (A) of the CVVT sprockets with the upper surface of the cylinder head to make No.1 cylinder be positioned at TDC.
3.
Install the new O-rings (A).
4.
Install the timing chain guide (A) and the timing chain (B).
Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

  
•
When installing a timing chain, align the timing marks on the sprockets with paint marks of the chain.
•
Order : Crankshaft sprocket → Timing chain guide → Intake CVVT sprocket → Exhaust CVVT sprocket.
5.
Install the chain tensioner arm (A).
Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

6.
Install the hydraulic tensioner (A) and remove the pin (B).
Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

  
Recheck the top dead center (TDC) marks on the crankshaft and camshaft.
7.
Install the timing chain cover.
    Timing Chain Inspection
    Sprockets, Hydraulic Tensioner, Chain Guide, Tensioner Arm, Timing Chain 1. Check the CVVT sprocket, crankshaft sprocket teeth for abnormal wear, cracks or damage. Repl ...

    Engine Electrical System
    ...

    See also:

    If you have a flat tire while driving
    If a tire goes flat while you are driving: 1.Take your foot off the accelerator pedal and let the vehicle slow down while driving straight ahead. Do not apply the brakes immediately or attempt to ...

    Cooling System Inspection
    Radiator hoses 1. Check radiator hoses for the following (1) Improper attachment (2) ...

    SRS components and functions
    The SRS consists of the following components: 1. Driver's front air bag module 2. Passenger's front air bag module 3. Side impact air bag modules 4. Curtain air bag modules 5. Retractor ...