Kia Soul: Timing Chain Inspection
Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Timing System / Timing Chain Inspection
Sprockets, Hydraulic Tensioner, Chain Guide, Tensioner Arm, Timing Chain
| 1. |
Check the CVVT sprocket, crankshaft sprocket teeth for abnormal
wear, cracks or damage. Replace if necessary.
|
| 2. |
Check a contact surface of the chain tensioner arm and guide for
abnormal wear, cracks or damage.
Replace if necessary.
|
| 3. |
Check the hydraulic tensioner for its piston stroke and ratchet
operation. Replace if necessary.
|
| 4. |
Check the timing chain for its elongation, abnormal wear or damage.
Replace if necessary.
|
Timing Chain Removal
1.
Turn the crankshaft pulley clockwise, and align its groove with
the timing mark of the timing chain cover.
2.
Remove the timing ...
Timing Chain Installation
1.
Dowel pin of crankshaft should be positioned at 3В° in relation
to vertical center line.
2.
Align the TDC marks (A) of the CVVT ...
See also:
Roller Blind Installation
1.
Install the roller blind side bracket (A) fit into the guide groove
(B).
2.
Tighten the mounting screws after installing the ro ...
Immobilizer Control Unit Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the main crash pad assembly.
(Refer to Body - " Main C ...
Intake Air Temperature Sensor (IATS). Description and Operation
Description
Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute
Pressure Sensor and detects the intake air temperature.
To calculate precise air quantity, correction o ...