| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Take care not to scratch the body surface.
|
|
|
1. |
After loosening the mounting screws, then remove the tail gate
trim (A).
|
|
2. |
Install in the reverse order of removal.
|
• |
Replace any damaged clips.
|
|
|
1. Tail gate latch assembly
...
See also:
Front Stabilizer Bar Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Loosen the bolt (A) and then disco ...
Driving in flooded areas
Avoid driving through flooded areas unless you are sure the water is no higher
than the bottom of the wheel hub. Drive through any water slowly.
Allow adequate stopping distance because brake perfo ...
Automatic transaxle operation
The automatic transaxle has 6 forward speeds and one reverse speed. The individual
speeds are selected automatically, depending on the position of the shift lever.
✽ NOTICE
The first few sh ...
Kia Soul: Tail Gate Trim Replacement
Tail Gate Trim Component Location
Tail Gate Latch Component Location