Kia Soul: Tire Removal - Tires/Wheels - Suspension SystemKia Soul: Tire Removal

Kia Soul 2014-2019 PS Service Manual / Suspension System / Tires/Wheels / Tire Removal

  
Using tires and wheel other than the recommended sizes could cause unusual handling characteristics and poor vehicle control, resulting in a serious accident.
1.
Remove valve core and deflate the tire.
2.
Remove the side of the tire bead area from the wheel using tire changing machine .

  
The tire bead should be broken approx. 90° from the valve side of the wheel. The bead breaker should not be set too deep.
Avoid tire/tool contact with the valve on dismount.
Dismount should end near the valve.
3.
Rotate the wheel clockwise.

    Tire Wear
    1. Measure the tread depth of the tires. Tread depth [limit] : 1.6 mm (0.0630 in.) 2. If the re ...

    Tire Installation
    1. Apply tire soap or lubrication to the top and bottom tire beads. 2. To fit the bottom bead, position the valve at the 5 o’clock pos ...

    See also:

    Condenser Repair procedures
    Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. ...

    Vehicle break-in process
    No special break-in period is needed. By following a few simple precautions for the first 600 miles (1,000 km) you may add to the performance, economy and life of your vehicle. Do not race the ...

    Valve Clearance Adjustment
       Inspect and adjust the valve clearance when the engine is cold (Engine coolant temperature : 20°C) and cylinder head is ...