Kia Soul: Removal
1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
2. |
Disconnect the ignition lock switch connector (A).
|
3. |
Remove the ignition lock and clutch switch (B).
|
Inspection
Signal Circuit Inspection
1.
Check ignition lock switch pull-up voltage
(1)
IG KEY "OFF", ENGINE "OFF".
...
Installation
1.
Install in the reverse order of removal.
(1)
Tighten the nut with the specified torque.
Tightening ...
See also:
Fuel Sender. Repair procedures
Removal
1.
Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump")
...
Air Ventilation Seat Control Unit Circuit Diagram
...
Glove box lamp (if equipped)
The glove box lamp comes on when the glove box is opened.
To prevent unnecessary charging system drain, close the glove box securely after
using the glove box. ...