Kia Soul: Power Door Lock Switch Diagnosis With GDS
Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Power Door Locks / Power Door Lock Switch Diagnosis With GDS
| 1. |
The BCM can be diagnosed by using the GDS. The BCM communicates
with the GDS which then displays inputs and outputs along with codes.
It will be able to diagnose defects of power door lock/unlock
with GDS quickly. GDS can operates actuator forcefully, input/output
value monitoring and self diagnosis.
|
| 2. |
To diagnose the SJB function, select the vehicle model, BCM
and DDM.
|
| 3. |
Select "Input/output monitoring", if you will check current
data of power door lock system. It provides input/output status
of DDM.
|
| 4. |
To perform functional test on SJB outputs, select "Actuation
Test".
|
Power Door Lock Actuators Inspection
Front Door Lock Module Inspection
1.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
2.
...
Power Door Lock Switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front Door Trim ...
See also:
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Disconnect the clutch switch connector (A).
...
Opening the hood
1.Pull the release lever to unlatch the hood. The hood should pop open slightly.
Open the hood after turning off the engine on a flat surface, shifting the shift
lever to the P(Park) position for ...
Oil Pressure Switch
1.
Check the continuity between the terminal and the body with an
ohmmeter.
If there is no continuity, replace the oil pressure switch.
...