Kia Soul: License plate light bulb replacement
1. Remove the lens by pressing the tabs.
2. Remove the socket from the lens.
3. Remove the bulb by turning it counter clockwise.
4. Install a new bulb in the socket and install the socket to the lens.
5. Reinstall the lens securely.
High mounted stop light replacement
1. Open the tailgate.
2. Remove the cover.
3. Disconnect the connector by pressing the clip (1).
Bulb type
4. Pull out the module from the high mounted stop light assembly by pulling both
...
Interior light bulb replacement
Map lamp
Room lamp
Luggage room lamp
Glove box lamp
Sunvisor lamp
1. Using a flat-blade screwdriver, gently pry the lens from the interior light
housing.
2. Remove the bulb by pullin ...
See also:
Schematic Diagrams
Circuit Diagram
Connector Pin Information
No.Wire harness connectorPanorama motorBlind motor1Ground 1Ground 1Ground 22Glass status signal / Tool glassGlass status signal/ Tool (Parameter)Tool (P ...
Virtual Engine Sound System Unit Repair procedures
Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the AVN head unit.
(Refer to Body Electrical System - "AVN System")
3.
Disconnect the VESS unit connector (A).
4.
Rem ...
Emergency tailgate safety release
Your vehicle is equipped with the emergency tailgate safety release lever located
on the bottom of the tailgate. When someone is inadvertently locked in the luggage
compartment, the tailgate can ...