Kia Soul: Light bulbs
WARNING - Lights
Prior to working on the light, firmly apply the parking brake, ensure that the ignition switch is turned to the LOCK position and turn off the lights to avoid burning your fingers or receiving an electric shock.
Use only the bulbs of the specified wattage.
CAUTION - Light replacement
Be sure to replace the burnedout bulb with one of the same wattage rating. Otherwise, it may cause damage to the fuse or electric wiring system.
If you don’t have necessary tools, the correct bulbs and the expertise, consult an authorized Kia dealer. In many cases, it is difficult to replace vehicle light bulbs because other parts of the vehicle must be removed before you can get to the bulb. This is especially true if you have to remove the headlight assembly to get to the bulb(s). Removing/installing the headlight assembly can result in damage to the vehicle.
- Headlight, position light, turn signal light, side marker light and front fog light bulb replacement
- Side repeater light bulb Type A replacement
- Side repeater light bulb Type B replacement
- Rear combination light bulb replacement
- High mounted stop light replacement
- License plate light bulb replacement
- Interior light bulb replacement
Fuse/relay panel description
Inner fuse panel Inside the fuse/relay panel covers, you can find the fuse/relay label describing fuse/relay name and capacity. Engine compartment fuse panel Engine 1.6 Engine 2. ...Headlight, position light, turn signal light, side marker light and front fog light bulb replacement
(1) Headlight (High) (2) Headlight (Low) (3) Front side marker light (4) Front turn signal/Position light (5) Front fog light (if equipped) If the headlight aiming adjustment is necessary after ...See also:
Emission control system
The emission control system of your vehicle is covered by a written limited warranty. Please see the warranty information contained in the Warranty & Maintenance booklet in your vehicle.
Your v ...
Cooling System Inspection
Radiator hoses
1.
Check radiator hoses for the following
(1)
Improper attachment
(2)
...
Blower OFF
Push the OFF button to turn off the blower. However you can still operate the
mode and air intake buttons as long as the ignition switch is in the position ON. ...