Kia Soul: Inspection - Clutch Release Fork and Clutch Release Bearing - Clutch SystemKia Soul: Inspection

Kia Soul 2014-2019 PS Service Manual / Clutch System / Clutch Release Fork and Clutch Release Bearing / Inspection

1.
Check for damage to boot.
2.
Check for deformation to clutch release fork.
3.
Check for deformation to clutch release bearing.
    Removal
    1. Remove the transaxle assembly. G 1.6 GDI (Refer to Manual Transaxle System - " Manual Transaxle") G 2.0 GDI (Refer to Manual Transaxle System - &qu ...

    Installation
    1. Install the boot (A). 2. Install the clip to the clutch release fork. 3. Apply to grease in location ...

    See also:

    Front Hub / Knuckle Replacement
    1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) fro ...

    Rear window wiper and washer switch
    The rear window wiper switch is located at the end of the wiper and washer switch lever. Turn the switch to the desired position to operate the rear wiper and washer. ON - Normal wiper operation ...

    Rear Disc Brake. Inspection
    Rear brake disc thickness check 1. Check the brake pads for wear and fade. 2. Check the brake disc for damage and cracks. ...