Kia Soul: Removal - Clutch Release Fork and Clutch Release Bearing - Clutch SystemKia Soul: Removal

Kia Soul 2014-2019 PS Service Manual / Clutch System / Clutch Release Fork and Clutch Release Bearing / Removal

1.
Remove the transaxle assembly.
G 1.6 GDI (Refer to Manual Transaxle System - " Manual Transaxle")
G 2.0 GDI (Refer to Manual Transaxle System - " Manual Transaxle")
2.
Remove the clutch release bearing (A).

3.
Pull the clip (A).

4.
Remove the clutch release fork (A).

5.
Remove the boot (A).

    Components
    1. Clutch release fork 2. Clutch cover assembly 3. Clutch disk assembly 4. Clutch release bearing ...

    Inspection
    1. Check for damage to boot. 2. Check for deformation to clutch release fork. 3. Check for deformation to clutc ...

    See also:

    Smart Key
    Smart Key Code Saving 1. Connect the DLC cable of GDS to the data link connector in driver side crash pad lower panel, turn the power on GDS. ...

    SRS Control Module (SRSCM). Installation
    1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...

    G-Sensor Calibration
    1. Ignition "OFF", connect GDS. 2. Ignition "ON" & Engine "OFF" select vehicle name and ESC system. ...