Removal
1. |
Release the residual pressure in fuel line (Refer to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line").
|
2. |
Remove the rear seat cushion.
|
3. |
Remove the fuel pump service cover (A).
![](images/books/1125/spsfl4510n.gif)
|
4. |
Disconnect the fuel pump connector (A) and the fuel tank pressure sensor connector (B).
|
5. |
Disconnect the fuel feed tube quick connector (C).
![](images/books/1125/srpfl4132n.gif)
|
6. |
Lift the vehicle and support the fuel tank with a jack.
|
7. |
Disconnect the center muffler hangers (A).
![](images/books/1125/spsfl4290n.gif)
|
8. |
Disconnect the fuel filler hose (A).
![](images/books/1125/spsfl4280n.gif)
|
9. |
Disconnect the vapor tube quick-connector (A).
![](images/books/1125/spsfl4300n.gif)
|
10. |
Remove the parking brake cable RH bracket mounting bolts (A) to obtain space for removing the fuel tank.
![](images/books/1125/spsfl4310n.gif)
|
11. |
Remove the fuel tank from the vehicle after removing the fuel tank band (A).
![](images/books/1125/spsfl4390n.gif)
|
Installation
1. |
Install in the reverse order of removal.
Fuel tank band mounting bolt:
39.2 ~ 54.0 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
|
|
Fuel Pressure Test (Low pressure system)
1.
Release the residual pressure in fuel line (Refer to the Fuel Delivery System - Repair Procedu ...
Inspection
[Fuel pump]
1.
Turn ignition switch OFF and disconnect the negative (-)battery cable.
...
See also:
Battery Components
1. Battery insulation pad
2. Battery
3. Battery tray
4. Battery mounting bracket
...
Air bag warning label
Air bag warning labels, some required by the U.S. National Highway Traffic Safety
Administration (NHTSA), are attached to the sunvisor to alert the driver and passengers
of potential risks of ...
Air conditioning
Push the A/C button to turn the air conditioning system on (indicator light will
illuminate).
Push the button again to turn the air conditioning system off. ...