Kia Soul: EBD(Electronic Brake-force Distribution) - ESC(Electronic Stability Control) System - Brake SystemKia Soul: EBD(Electronic Brake-force Distribution)

Kia Soul 2014-2019 PS Service Manual / Brake System / ESC(Electronic Stability Control) System / EBD(Electronic Brake-force Distribution)

The EBD system (Electronic Brake force Distribution) as a sub-system of the ABS system is to control the effective adhesion utilization by the rear wheels.
It further utilizes the efficiency of highly developed ABS equipment by controlling the slip of the rear wheels in the partial braking range.
The brake force is moved even closer to the optimum and controlled electronically, thus dispensing with the need for the proportioning valve.
The proportioning valve, because of a mechanical device, has limitations to achieve an ideal brake force distribution tothe rear wheels as well as to carry out the flexible brake force distribution proportioning to the vehicle load or weight increasing. And in the event of malfunctioning, driver cannot notice whether it fails or not.
EBD controlled by the ABS Control Module, calculates the slip ratio of each wheel at all times and controls the brake pressure of the rear wheels not to exceed that of the front wheels.
If the EBD fails, the EBD warning lamp (Parking brake lamp) lights up.
Advantages
-
Function improvement of the base-brake system.
-
Compensation for the different friction coefficients.
-
Elimination of the proportioning valve.
-
Failure recognition by the warning lamp.
Comparison between Proportioning valve and EBD

    Failure Diagnosis
    1. In principle, ESC and TCS controls are prohibited in case of ABS failure. 2. When ESC or TCS fails, only the failed system control is pr ...

    ESC Control Module. Components
    1. Front - left tube 2. Rear - right tube 3. Rear - left tube 4. Front - right tube 5. MC2 6. MC1 7. ESC control module(HECU) 8. Bracket ...

    See also:

    Engine compartment
    1. Windshield washer fluid reservoir 2. Engine oil filler cap 3. Engine oil dipstick 4. Engine coolant reservoir 5. Radiator cap 6. Brake/clutch fluid reservoir 7. Positive battery terminal ...

    Cylinder Head Cover Installation
    1. Install the cylinder head cover (A) with a new gasket (B).    Do ...

    Map lamp
    Press the lens (1) or button (1) to turn the map lamp on or off ROOM (2) : - The map lamp and room lamp stays on at all times. - To turn off the ROOM mode, press the ROOM button (2) once again ...