Kia Soul: Cooling Fan Specifications - Cooling System - Engine Mechanical SystemKia Soul: Cooling Fan Specifications

Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Cooling System / Cooling Fan Specifications

Item
 Specification
Motor capacity (W)
 140 (With A/C)
 120 (Without A/C)
Fan type
 Puller
 Puller
Fan speed control
 Resistor
 　-
Air flow rate [㎥/h (yd³/h)]
 1,700 (2,224) -10% min.
 1,730 (2,263) -10% min.
Fan speed (rpm)
 1,950 ±10%
 1,850 ±10%
Current (A)
 11.7 +10% max.
 10.0 +10% max.

    Cooling Fan Description
    [Air conditioning type] The cooling fan operates in 2 stages (HIGH/LOW). The engine control module (ECM) controls the cooling fan according to the coolant temperature, vehicle speed and A ...

    Cooling Fan Circuit Diagram
    ...

    See also:

    Rear Torsion Beam Axle Replacement
    1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from f ...

    AVN Head Unit Installation
    1. Connect the AVN head unit connectors. 2. Install the AVN head unit. 3. Install the ...

    Operating door locks from inside the vehicle
    With the door lock button To unlock a door, push the door lock button (1) to the “Unlock” position. The red mark (2) on the button will be visible. To lock a door, push the door lock ...