Kia Soul: Chassis/Body nuts & bolts Inspection - Chassis - MaintenanceKia Soul: Chassis/Body nuts & bolts Inspection

Kia Soul 2014-2019 PS Service Manual / Maintenance / Chassis / Chassis/Body nuts & bolts Inspection

1.
Tighten bolts and nuts on chassis and body.
(1)
Where necessary, tighten all the parts of the chassis.
A.
Front axle and suspension
A.
Drive train
A.
Rear axle and suspension
A.
Brake system
A.
Engine mounting
A.
Fuel tank
A.
Exhaust pipe system, etc.
(2)
Where necessary, tighten all the parts of the body.
A.
Seat belt system
A.
Seat
A.
Doors and hood
A.
Body mountings, etc.
    Brake pedal Inspection
    Check that the brake pedal operates smoothly. Brake Pedal Height and Stop Lamp Switch clearance Adjustment 1. Disconnect the stop lamp switch connector (A). ...

    Disc brakes and pads Inspection
    Check the pads for excessive wear, discs for run out and wear, and calipers for fluid leakage. Front Brake Front Brake Disc Thickness Check 1. Check the ...

    See also:

    Repair procedures
    Fuel Pressure Test (Low pressure system) 1. Release the residual pressure in fuel line (Refer to the Fuel Delivery System - Repair Procedu ...

    Seat Heater (Air Ventilation) Circuit Diagram
    ...

    Closing the fuel filler lid
    1. To install the cap, turn it clockwise until it “clicks” once. This indicates that the cap is securely tightened. 2. Close the fuel filler lid and push it in lightly making sure that it is se ...