Kia Soul: Battery Sensor Adjustment - Charging System - Engine Electrical SystemKia Soul: Battery Sensor Adjustment

Kia Soul 2014-2019 PS Service Manual / Engine Electrical System / Charging System / Battery Sensor Adjustment

Battery Sensor Recalibration Procedure
After reconnecting the battery negative cable, AMS and ISG function does not operates until the system is stabilized, about 4 hours. If disconnecting the negative (-) battery cable from the battery during repair work for the vehicle equipped with ISG function, Battery sensor recalibration procedure should be performed after finishing the repair work.
1.
Turn the Iginition switch ON and OFF.
2.
Park the vehicle for about 4 hours with the hood and all doors closed.
    Battery Sensor Installation
    1. Install in the reverse order of removal. Battery sensor cable installation bolt: 26.5 ~ 32.4 N.m (2.7 ~ 3.3 kgf.m, 19.5 ~ 23.9 l ...

    See also:

    Brake Switch. Removal
    1. Disconnect the brake switch connector (A). 2. Pull the locking plate (A) as indicated by the arrow. 3. ...

    Front Wiper Motor Component Location
    1. Cap 2. Nut 3. Wiper arm & blade 4. Rivet 5. Cowl top cover 6. Bolt 7. Wiper motor & linkage assembly ...

    Positive Crankcase Ventilation (PCV) Valve Installation
    1. Install in the reverse order of removal. PCV Valve: 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) ...