Kia Soul: Brake Switch. Removal
| 1. |
Disconnect the brake switch connector (A).
|
| 2. |
Pull the locking plate (A) as indicated by the arrow.
|
| 3. |
Turn brake switch 45В° counterclockwise and remove it.
|
Brake Pedal. Installation
1.
Pre-tighten the bracket fixing bolt (A) in dash panel.
2.
Install the brake booster and brake pedal member fixing nuts (A)
secur ...
Brake Switch. Inspection
1.
Check the stop lamp switch.
(1)
Connect a circuit tester to the connector of stop lamp
switch, and check whether or not there is ...
See also:
Scheduled maintenance service
Follow the Normal Maintenance Schedule if the vehicle is usually operated where
none of the following conditions apply. If any of the following conditions apply,
follow the Maintenance Under Sever ...
Rear Washer Switch Inspection
1.
Check for continuity between the terminals while operating
the wiper and washer switch. If it is not normal condition, replace
wiper and wiper switch.
...
Steering Column and Shaft. Components
1. Steering column assembly
2. Steering joint assembly
...