Kia Soul: Air intake control - Manual heating and air conditioning - Automatic climate control system - Features of your vehicleKia Soul: Air intake control

Kia Soul 2009-2013 AM Owner's Manual / Features of your vehicle / Automatic climate control system / Manual heating and air conditioning / Air intake control

This is used to select outside (fresh) air position or recirculated air position.

This is used to select outside (fresh) air position or recirculated air position.

To change the air intake control position, push the control button.

55555

Recirculated air position

The indicator light on the button illuminates when the recirculated air position

The indicator light on the button illuminates when the recirculated air position is selected.

With the recirculated air position selected, air from passenger compartment will be drawn through the heating system and heated or cooled according to the function selected.

Outside (fresh) air position

The indicator light on the button does not illuminate when the outside (fresh)

The indicator light on the button does not illuminate when the outside (fresh) air position is selected.

With the outside (fresh) air position selected, air enters the vehicle from outside and is heated or cooled according to the function selected.

WARNING - Recirculated air

Continuous use of the climate control system in the recirculated air position can cause drowsiness or sleepiness, and loss of vehicle control. Set the air intake control to the outside (fresh) air position as much as possible while driving.

WARNING - Reduced visibility

Continued climate control system operation in the recirculated air position may allow humidity to increase inside vehicle which may fog the glass and obscure visibility.

It should be noted that prolonged operation of the heating in recirculated air position will cause fogging of the windshield and side windows and the air within the passenger compartment will become stale.

In addition, prolonged use of the air conditioning with the recirculated air position selected, will result in excessively dry air in the passenger compartment.

    Temperature control
    The temperature will increase to the maximum (HI) by pushing the button (). The temperature will decrease to the minimum (Lo) by pushing the button (). When turning the knob, the temperature will ...

    Fan speed control
    The fan speed can be set to the desired speed by pressing the fan speed control button. To change the fan speed, press the button () for higher speed, or push the button () for lower speed. T ...

    See also:

    Turn signals and lane change signals
    The ignition switch must be on for the turn signals to function. To turn on the turn signals, move the lever up or down (A). The green arrow indicators on the instrument panel indicate which tur ...

    On-board Refueling Vapor Recovery (ORVR) valve Removal
    1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Remove the fuel pump. (Refer to Fuel System - "Fuel Pump&qu ...

    Rear Torsion Beam Axle Replacement
    1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from f ...