Kia Soul: Yaw-rate and G Sensor. Removal
Kia Soul 2014-2019 PS Service Manual / Brake System / ESC(Electronic Stability Control) System / Yaw-rate and G Sensor. Removal
| 1. |
Remove the ignition key from the vehicle.
|
| 2. |
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
|
| 3. |
Disconnect the DAB, PAB, SAB, CAB and BPT connectors.
|
| 4. |
Remove the floor console.
(Refer to Body - "Floor console")
|
| 5. |
Remove the rear heating joint duct (A).
|
| 6. |
Pull up the lock of the SRSCM connector and disconnect the connector
(A).
|
| 7. |
Remove the SRSCM mounting bolts(3EA) from the SRSCM, then remove
the SRSCM.
|
Yaw-rate and G Sensor. Description
The yaw rate and G sensor is included inside the air bag control module
(SRSCM).
When the vehicle is turning with respect to a vertical axis the yaw rate
sensor detects the yaw rate elec ...
Yaw-rate and G Sensor. Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three
minutes before beginning ...
See also:
Before starting
Close and lock all doors.
Position the seat so that all controls are easily reached.
Buckle your seat belt.
Adjust the inside and outside rearview mirrors.
Be sure that all lights work.
C ...
Multimedia Jack Installation
1.
Install the multimedia jack.
2.
Install the floor console upper cover.
3.
Connect ...
CVVT Oil Control Valve (OCV). Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OCV connector.
3.
Measure resistance between the ...