Kia Soul: CVVT Oil Control Valve (OCV). Repair procedures - Engine Control System - Engine Control / Fuel SystemKia Soul: CVVT Oil Control Valve (OCV). Repair procedures

Kia Soul 2014-2019 PS Service Manual / Engine Control / Fuel System / Engine Control System / CVVT Oil Control Valve (OCV). Repair procedures

Inspection

1.
Turn the ignition switch OFF.
2.
Disconnect the OCV connector.
3.
Measure resistance between the OCV terminals 1 and 2.
4.
Check that the resistance is within the specification.
Specification: Refer to “Specification”

Removal

1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the CVVT oil control valve connector (A).
3.
Remove the mounting bolt (B), and then remove the valve from the engine.
[Bank 1 / Intake]

[Bank 1 / Exhaust]

Installation

  
•
Install the component with the specified torques.
•
Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
  
•
Apply engine oil to the valve O-ring.
1.
Install in the reverse order of removal.
CVVT oil control valve installation bolt:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
    CVVT Oil Control Valve (OCV). Schematic Diagrams
    Circuit Diagram (M/T) (A/T) ...

    Variable Intake Solenoid (VIS) Valve. Description and Operation
    Description Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold. The VIS valve controls the vacuum modulator which activates a valve in the intake manifold. The ...

    See also:

    Room lamp
    Type B The light will turn on and off according to the switch position. (1) OFF The light stays off at all times. (2) DOOR The light comes on when any door (or tailgate) is opened regardless of ...

    Tune
    Rotate TUNE knob : Changes the channel number or scrolls category list. Press TUNE knob : Selects the menu. ...

    Rear Bumper Beam Assembly Replacement
       • Put on gloves to protect your hands. ...