Kia Soul: Stowing the rear seat belt
The rear seat belt buckles can be stowed in the pocket between the rear seatback and cushion when not in use.
Routing the seat belt webbing through the rear seat belt guides will help keep the belts from being trapped behind or under the seats when they are folded down.
After inserting the seat belt, tighten the belt webbing by pulling it up.
CAUTION - Seat belt guide
Remove the seat belt from the guides before using. If you pull the seat belt when it is stored in the guides, it may damage the guides and/or belt webbing.
Seat belts - Front passenger and rear seat 3-point system with combination locking
retractor
To fasten your seat belt:
Combination retractor type seat belts are installed in the rear seat positions
to help accommodate the installation of child restraint systems. Although a combination
re ...
Pre-tensioner seat belt
Your vehicle is equipped with driver's and front passenger's pre-tensioner seat
belts. The purpose of the pretensioner is to make sure that the seat belts fit tightly
against the occupan ...
See also:
Specifications
Item
Specification
Type
MDPS(Motor Driven Power Steering)
Steering gear
Type
Rack & Pinion
Rack stroke
154 В± 1 ...
Special Service Tools
Tool Name / Number
Illustration
Description
Strut spring compressor
09546-26000
Compression of coil spring
Ball joint pulle ...
Passenger Airbag (PAB) Module. Removal
1.
Disconnect the battery negative cable and wait for at least thirty
seconds before beginning work.
2.
Remove the glove box housing.
...