Kia Soul: Passenger Airbag (PAB) Module. Removal
Kia Soul 2014-2019 PS Service Manual / Restraint / Airbag Module / Passenger Airbag (PAB) Module. Removal
1. |
Disconnect the battery negative cable and wait for at least thirty
seconds before beginning work.
|
2. |
Remove the glove box housing.
(Refer to Body - "Glove box housing")
|
3. |
Remove the passenger airbag mounting bolts (A).
|
4. |
Disconnect the passenger airbag connector (B).
|
5. |
Remove the crash pad.
(Refer to Body - "Main crash pad assembly")
|
6. |
Remove the mounting bolts from the crash pad and then remove the
passenger airbag (A).
|
Passenger Airbag (PAB) Module. Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable from battery and wait for at least thirty seconds bef ...See also:
Canister Close Valve (CCV). Specifications
Specification
Item
Specification
Coil Resistance (Ω)
19.5 ~ 22.5 [20°C(68°F)
...
Reporting safety defects
If you believe that your vehicle has a defect which could cause a crash or could
cause injury or death, you should immediately inform the National Highway Traffic
Safety Administration (NHTSA) in ...
This device complies with Part 15 of the FCC rules
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may c ...