Kia Soul: Side Impact Sensor (SIS). Removal
Pressure Side Impact Sensor |
|
1. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
2. |
Remove the front door trim.
(Refer to Body - "Front door trim")
|
3. |
Disconnect the pressure side impact sensor connector (A) and remove
the pressure side impact sensor mounting screws (B).
|
Side Impact Sensor
1. |
Disconnect the battery negative cable and wait for at least three
minutes before beginning work.
|
2. |
To remove the semergency fastening device (C), keep on pushing
the lock pin (A) as arrow direction. And then remove the seat belt after
pushing the lock pin (B).
|
3. |
Remove the center pillar lower trim.
(Refer to Body - "Center pillar trim")
|
4. |
Disconnect the side impact sensor connector (A).
|
5. |
Loosen the side impact sensor mounting bolt and then remove the
side impact sensor (B).
|
Side Impact Sensor (SIS). Installation
Pressure Side Impact Sensor 1. Install the new pressure side impact sensor with the screws (B) and then connect the pressure side impact sensor connector (A). ...See also:
Crankshaft Position Sensor (CKPS). Specifications
Specification
Item
Specification
Coil Resistance (Ω)
774 ~ 946 [20°C (68°F)]
...
Climate information screen selection
Press the climate information screen selection button to view climate information
in full screen mode. ...
Shift Lever. Removal
1.
Remove the shift lever knob & boots assembly (A) by Pulling in
the upside.
2.
Remove the floor console assembly.
(R ...