Kia Soul: Removal
|
|
1. |
Remove both sides of the front pillar trim.
(Refer to Interior Trim - "Front Pillar Trim")
|
2. |
Remove both sides of the A pillar garnish.
(Refer to Body Side Moulding- "A Pillar Garnish")
|
3. |
Remove the cowl top cover.
(Refer to "Cowl Top Cover")
|
4. |
Remove the inside rear view mirror assembly.
(Refer to Mirror - "Inside Rear View Mirror")
|
5. |
Remove the LDWS unit.
(Refer to Body Electrical System - "Lane Departure Warning System
(LDWS) Unit")
|
6. |
Cut out the adhesive using a cutter (A).
|
7. |
Cut off the sealant on the edge (B) while pulling the piano wire
(A) left and right.
|
8. |
If a piano wire is visible inside the chassis, pull the piano
wire (A) line inside.
|
9. |
Cut off the sealant on (A-A), (B-B), (C-C), while pulling a piano
wire (A) left and right.
|
10. |
Remove the windshield glass (B) carefully using the glass holder
(A).
|
Components
1. Windshield glass 2. Windshield glass moulding ...Installtion
1. With a knife, scrape the old adhesive smooth to a thickness of about 2mm (0.08 in.) on the bonding surface around the entire windshield opening flange: ...See also:
Favorites
Press the
key
Select
[Favorites]
1) Saved favorite contact : Connects call upon selection
2) To add favorite : Downloaded contacts be saved as favorite.
To save Favorite, contac ...
Engine compartment
1. Windshield washer fluid reservoir
2. Engine oil filler cap
3. Engine oil dipstick
4. Engine coolant reservoir
5. Radiator cap
6. Brake/clutch fluid reservoir
7. Positive battery terminal
...
System operation
Ventilation
1. Set the mode to the
position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed con ...