Kia Soul: Removal
1. |
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
|
2. |
To remove the emergency fastening device (C), keep on pushing
the lock pin (A) as arrow direction. And then remove the seat belt after
pushing the lock pin (B).
|
3. |
Remove the center pillar lower trim.
(Refer to Body - "Center pillar trim")
|
4. |
Remove the center pillar upper trim.
(Refer to Body - "Center pillar trim")
|
5. |
After loosening the mounting bolt, then remove the front seat
belt upper anchor (A).
|
6. |
Disconnect the seat belt pretensioner connector (A).
|
7. |
Loosen the seat belt pretensioner mounting bolt (B) and remove
the seat belt pretensioner.
|
Components
...Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least thirty seconds. ...See also:
Cruise control system
The cruise control system allows you to program the vehicle to maintain a constant
speed without pressing the accelerator pedal.
This system is designed to function above approximately 25 mph (40 k ...
Front Seat Frame Assembly Component Location
1. Front seat back frame assembly
2. Front seat cushion frame assembly
...
Opening the hood
1. Pull the release lever to unlatch the hood. The hood should pop open slightly.
WARNING
Open the hood after turning off the engine on a flat surface, shifting the
shift lever to the P (Park) ...