Kia Soul: Installation
1. |
Remove the ignition key from the vehicle.
|
2. |
Disconnect the battery negative cable and wait for at least thirty
seconds.
|
3. |
Install the seat belt pretensioner with bolt (B).
|
4. |
Connect the seat belt pretensioner connector (A).
|
5. |
Install the front seat belt upper anchor (A).
|
6. |
Install the center pillar upper trim.
(Refer to Body - "Center pillar trim")
|
7. |
Install the center pillar lower trim.
(Refer to Body - "Center pillar trim")
|
8. |
Insert the seat belt to the emergency fastening device (A).
|
9. |
Reconnect the battery negative cable.
|
10. |
After installing the seat belt pretensioner, confirm proper system
operation:
|
Removal
1. Disconnect the battery negative cable, and wait for at least thirty seconds before beginning work. 2. To remove the emergency fastening ...Emergency Fastening Device (EFD). Description
Emergency Fastening Device (EFD) is deployed with Belt Pretensioner at the same time to pull down the seat belt strongly If it gets into its deploy condition after a collision. It is located ...See also:
Ignition Coil Inspection
1.
Measure the primary coil resistance between terminals (+) and
(-).
Standard value:
0.79Ω В± 15%
...
Condenser Inspection
1.
Check the condenser fins for clogging and damage. If clogged,
clean them with water, and blow them with compressed air. If bent, gently
bend them using a screwdrive ...
ISG (Idel Stop and Go) system
Your vehicle may be equipped with the ISG system, which reduces fuel consumption
by automatically shutting down the engine, when the vehicle is at a standstill.
(For example : red light, stop sign ...