Kia Soul: Removal
1. |
Remove the clutch pedal mounting nuts (A).
|
2. |
Separate the push rod (C) after remove the pin (A) and washer
(B).
|
3. |
Remove the air cleaner assembly.
G 1.6 GDI (Refer to Engine Mechanical System - "Air Cleaner")
G 2.0 GDI (Refer to Engine Mechanical System - "Air Cleaner")
|
4. |
Remove the battery and battery tray.
G 1.6 GDI (Refer to Engine Electrical System - "Battery")
G 2.0 GDI (Refer to Engine Electrical System - "Battery")
|
5. |
Disconnect the clutch tube (B) and reservoir hose (A) from the
clutch master cylinder.
|
Components
1. Clutch pedal assembly 2. Ignition lock and clutch switch 3. Master cylinder 4. Clutch tube ...Installation
1. Install in the reverse order of removal. 2. After be equipped, perform bleeding air procedure in clutch release cylinder after pouring t ...See also:
Inspection
Signal Circuit Inspection
1.
Check clutch switch pull-up voltage
(1)
IG KEY "OFF", ENGINE "OFF".
...
Shift Lever. Components
1. Shift lever knob & boots aseembly
2. Shift lever assembly
3. Shift cable assembly
4. Shift cable retainer
5. Shift cable brakcet
6. Manual control lever
...
Tightening Torque
Items
N.m
Kgf.m
lb-ft
Front and rear doors
Door hinge to body
34.2 ~ 41.2
3.5 ~ 4.2
25.3 ~ 30.4
Door hinge to door
...