Kia Soul: Parking Brake Lever. Removal
Kia Soul 2014-2019 PS Service Manual / Brake System / Parking Brake System / Parking Brake Lever. Removal
The parking brake cables must not be bent or distorted. This will
lead to stiff operation and premature failure.
|
1. |
Release the parking brake lever and parking brake cable is loose.
|
2. |
Remove the floor console assembly.
(Refer to Body - "Floor console")
|
3. |
Disconnect the connector (A) of parking brake switch.
|
4. |
Loosen the adjusting nut (A) and the parking brake cables (B).
|
5. |
Remove the parking brake lever assembly (A) after removing the
bolts.
|
Components
1. Parking brake lever 2. Parking brake cable 3. Equalizer assembly ...Parking Brake Lever. Installation
1. Install the parking brake lever assembly (A). Tightening torque : 19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft) ...See also:
Rear Bumper Cover Replacement
•
Put on gloves to protect your hands.
...
Closing the hood
1. Before closing the hood, check the following:
• All filler caps in the engine compartment must be correctly installed.
• Gloves, rags or any other combustible material must be removed from th ...
Pre-tensioner seat belt
Your vehicle is equipped with driver's and front passenger's pre-tensioner seat
belts. The purpose of the pretensioner is to make sure that the seat belts fit tightly
against the occupan ...