Kia Soul: Installation
When replacing a clutch housing or transaxle assembly, the wiring
bracket should be installed in accordance with the clutch housing type.
|
If the oil seal on the transaxle case side is damaged and fluid
is leaking, replace the oil seal with a new unit. When installing the
new oil seal, use the specialized tool (oil seal installer, 09431-26100).
|
1. |
Install in the reverse order of removal.
|
2. |
Adding manual transaxle fluid after Installing the manual transaxle.
(Refer to Manual Transaxle System - "Manual Transaxle Fluid")
|
Removal
1. Remove the air cleaner assembly and air duct. (Refer to Engine Mechanical System - "Air Cleaner") 2. Remove the battery an ...See also:
Sunvisor Component Location
1. Sunvisor
2. Retainer
...
Torque Converter Control Solenoid Valve (T/CON_VFS). Removal
1.
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
2.
Remove the drain plug (A) and dr ...
Battery recharging
WARNING - Risk of electrocution
Never touch the electrical ignition system while the vehicle is running. This
system works with high voltage which can "zap" you.
Your vehicle has a maint ...