Kia Soul: Inhibitor Switch. Installation
Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Inhibitor Switch. Installation
1. |
Check that the shift lever is placed in the "N" position
|
2. |
Install the inhibitor switch (A).
|
3. |
Install the manual control lever (A).
|
4. |
Align the hole (A) in the manual control lever with the "N" position
hole (B) of the inhibitor switch and then insert the SST inhibitor switch
guide pin (09480-A3800).
|
5. |
Tighten the nut (A) and bolts (B) with the specified torque.
|
6. |
Remove the SST (09480-A3800) from the hole.
|
7. |
Connect the inhibitor switch connector (A).
|
8. |
Install the shift cable by tightening nut (B).
|
9. |
Push the shift cable to the arrow "F" to eliminate free play and
then tighten the nut (A) with the specified torque.
|
10. |
Install the air cleaner assembly.
(Refer to Engine Mechanical System - "Air cleaner")
|
11. |
Connect the battery negative (-) cable.
|
Inhibitor Switch. Removal
1. Place the shift lever into the "N" position. 2. Disconnect the battery negative (-) cable. 3. Remo ...Shift Lever. Components
1. Shift lever knob & boots aseembly 2. Shift lever assembly 3. Shift cable assembly 4. Shift cable retainer 5. Shift cable brakcet 6. Manual control lever ...See also:
Power Window Switch Inspection
Power Window Main Switch Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim.
...
45,000 miles or 36 months
❑ Inspect air cleaner filter
❑ Inspect air conditioning compressor, air conditioner refrigerant and performance
(if equipped)
❑ Inspect cooling system *1
❑ Inspect dri ...
Audio system
If you install an aftermarket HID head lamps, your vehicle’s audio and electronic
devices may malfunction. ...